Seventeam 620W ATX power supply
Price:
£71.51
inc VAT
Warranty: 3 years
Out of stock
Overview
ST-620PAF delivers 80Plus efficiency through its full power range.
The 120mm variable speed fan is quiet, and delivers just the required cooling when needed
based on how much power is being drawn from the power supply by your system.
It features an ATX 20+4pin, ATX12V 4-pin and EPS12V 8-pin power connectors.
Other connectors include 4 standard molex 4-pin HDD, 4 SATA, 1 FDD and 2 PCI-E.
Every single power cable has also been wrapped in mesh tubing to help keep cable runs clean and
tidy this also help to control internal system airflow.
- 80PLUS Certified
- 120mm Low-Noise Fan
- Supports Nvidia SLI and ATI Crossfire graphics
- Supports Intel Core i7, Quad core and AMD dual core CPU
- Build in STNC fan control
Specification
| GENERAL | |
|---|---|
| Output Power | 620W |
| PFC | Active PFC |
| Efficiency | >80% @ full load |
| Power Good Signal | 100 to 500ms |
| Hold-up time | 17ms @ 25°C |
| Weight | 2.5kg |
| Colour | Black |
| Fan | Single 120mm DC fan |
| Dimensions | 140x150x86mm (LxWxH) |
| Protection | OCP, OVP, UVP, OPP, Short Circuit Protecion |
| INPUT | |
|---|---|
| Input Voltage | 90 to 264Vac |
| Input Frequency | 50~60Hz |
| MTBF | >100,000 hours minumum @ 25°C |
| OUTPUT | ||||||
|---|---|---|---|---|---|---|
| Voltage | +5V | +12V1 | +12V2 | -12V | +3.3V | +5Vsb |
| Min current | 1A | 1A | 1A | 0A | 0.5A | 0A |
| Nominal current | 15A | 9A | 15A | 0.4A | 12.5A | 1.25A |
| Max current | 30A | 18A | 30A | 0.8A | 25A | 2.5A |
| ENVIRONMENTAL | |
|---|---|
| Operational Temperature | +5 to +50°C |
| Storage Temperature | -40 to +70°C |
| Operational Humidity | 20 to 85%, non-condensing |
| Storage Humiditiy | 10 to 95%, non-condensing |
*Notes:
1) Maxiumum continous DC output shall not exceed 620W.
2) Maxiumum continous combined load on +5V and 3.3V outputs shall not exceed 150W.
3) Maxiumum continous combined load on +12V1 and +12V2 outputs shall not exceed 576W.
4) Maxiumum continous combined load on +5V, 3.3V, +12V1 and +12V2 outputs shall not exceed 598W.
