Suitable for any model of HP s3000 series this power supply is a good quality replacement unit.
Replaces all Delta Electronics or Acbel 160W, 180W or 220W units.
An adapter is fitted to achieve the correct connection for the mini 24pin connector
Although the PSU case is a slightly different and shorter in size, these units do fit tight, and pull securely into place via the screw holes on the rear
Packaged with care
Each PSU is carefully packaged in its own custom sized recyclable cardboard box. This is then wrapped in bubble wrap and sealed in a bag to ensure your goods arrive safe and securely.
Product Warranty Period: 1-year warranty
Connectors
1 x 24pin mini ATX connector
2 x 90° SATA connector with locking latches
2 x molex
1 x FDD
SPECIFICATIONS
|
GENERAL |
|
|
Output Power |
Maximum 250W continuous |
|
PFC |
Active PFC (Power Factor Correction) |
|
Efficiency |
>80% typically 80Plus Bronze Certified |
|
Weight |
0.850kg |
|
Colour |
Silver grey |
|
Dimensions |
150x82x40.5mm (LxWxH) |
|
Protection |
OVP, OPP, Short Circuit Protection |
|
INPUT |
|
|
Input Voltage |
100 to 240Vac |
|
Input Frequency |
50~60Hz |
|
MTBF |
100,000 hours minimum @ 25°C excluding fan |
|
Input Current |
<3A @ 115Vac |
|
OUTPUT |
|||||
|
Voltage |
+5V |
+12V |
|
+3.3V |
+5Vsb |
|
Max current |
17A |
18A |
|
18A |
2A |
|
ENVIRONMENTAL |
|
|
Operational Temperature |
0 to +45°C |
|
Storage Temperature |
-20 to +80°C |
|
Operational Humidity |
5 to 95%, non-condensing |
|
Storage Humidity |
5 to 95%, non-condensing |
|
SAFETY |
|
|
UL 1950, CUL |
|
|
TUV:EN60950 IEC 60950 |
|
FAQ
Q. One of the SATA connectors only has 4 wires, will it still work with my HDD or DVDRW?
A. Yes although the wire it does not carry is the orange wire, 3.3V, no mainstream 2.5" or 3.5" HDD or 5.25" DVDRW's use the 3.3V for power only the red 5V and yellow 12V. Only a few uncommon 1.8" SSD drives use the 3.3V for power.
Q. The power supply is a different shape and a little shorter than the original one will it still fit?
A. Yes although the original is a non standard proprietary size our replacement does fit all be it tightly pulling securly into place with the rear screw holes.
Q. My power supply is only 160W, your replacemetn is 250W. Wont it give my system to much power?
A. No, the system only draws as much power as it needs. The power rating of the power supply is its 'capability' not what its delivers. What you should never do is replace it with a power supply that offers less available power ie one with less than 160W in your particular case as the system load may then be to great for the power supply causing system instability and many other possible issues.
