FSP220-50FGBBI 220W Flex ATX 1U industrial power supply – Overtek
1

Your cart is empty.

Powering you ON

FSP220-50FGBBI - 220W Industrial Flex ATX 1U power supply

FSP220-50FGBBI - 220W Industrial Flex ATX 1U power supply

£50.00

£60.00 IncVAT

5 pcs in stock

  • 220W Flex ATX 1U
  • Typically 85% efficient
  • Low Noise Fan
  • 2 Year Warranty
  • 100% Burn in test
  • Industrial Grade
  • Ball Bearing Fan
  • ErP 5Vsb <0.5W
  • Active PFC
  • RoHS compliant
  • EN-62368

FSP220-50FGGBI is an industrial grade Flex ATX 1U power supply manufactured by FSP / Fortron. FSP220-50FGGBI can provide a maximum continuous power output of 220W. FSP220-50FGGBI supersedes FSP220-60LE providing a drop in replacement that's compliant with the new EN-62368 standard. An innovation of FSP220-50FGBBI is that no internal rear bracket is required where one was used previously as this has now been fully integrated into the new PSU chassis design

 

SPECIFICATIONS

Model: FSP220-60LE
Wattage: 220W
Dimensions: 150mm (L) × 81.5 mm (W) × 40.5mm (H)
Efficiency: 85% - Bronze level.
Input Specs:

Voltage: 90 to 264Vac (115/230Vac)

Frequency: 47-63Hz

Current: 4A / 2A

Output Specs:

3.3V @ 8A

5V @ 12A

12V @ 14A

-12V @ 0.3A

5Vsb @ 2.5A

*(Max combined load on 3.3V +5V 61W)

Protection:

Over voltage protection

Overload protection at 150% of max power the

Connectors

1 x 20+4 pin ATX

1 x 4pin ATX12V (P4)

2 x 15pin SATA

3 x 4pin Molex

1 x 4pin FDD

ENVIRONMENTAL

 

Operating temps

0-50°C 85% RH non condensing
Storage temps -20 to 80°C 95% RH non condensing
Vibration

Will withstand the following imposed conditions without experiencing non-recoverable failure or deviation from specified output characteristics.
Vibration Operation, 0.01g²/Hz at 5 Hz sloping to 0.02g²/Hz at 20 Hz, and maintaining 0.02g²/Hz from 20 Hz to 500 Hz.

The area under the PSD curve is 3.13gRMS.

The duration shall be 20 minutes per axis for all three axes on all samples. Plane of vibration to be along three mutually perpendicular axes.

Shock

Storage 40G, 9 mSec. Half-sine wave pulse in both directions on three mutually perpendicular axes.


Operating 10G, 11mSec. Half-sine wave pulse in both directions on three mutually perpendicular axes.

Altitude

The power supply is suitable for all climates including tropical  use at altitudes not exceeding 5000m above Sea level

Reliability

The power supply has a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25, with maximum-output load, and at nominal AC input voltage

Standards Conformance

CE, Fcc, UL/cUL, TUV

Customer Reviews

Based on 1 review Write a review